Filter
Top Products
2-6
Set the guides so that there is a
little amount of clearance between
the side edges and the guides.
Load the document face down on
the ADF paper chute and adjust
the guides to the document size.
After the read command is issued
from the host system, scanned
documents are stacked in the
stacker for removal.
NOTE
max 4mm
(0.16")
7
8
Documents
Guide
Guide lever
(Both sides)
• Squeeze the guide lever to free the guides.
• Load documents so that the thickness is less than 4mm.
• Set the guides so that they touch the document sides.