Filter
Top Products
C141-E035-01EN 3 - 1
CHAPTER 3 DATA FORMAT
3.1 Data Space
3.2 Logical Data Block Addressing
3.3 Defect Management
This chapter explains data space definition, logical data block addressing, and defect management on
the IDD.
3.1 Data Space
The IDD manages the entire data storage area divided into the following three data spaces.
• User space: Storage area for user data
• Internal test space: Reserved area for diagnostic purposes
• System space: Area for exclusive use of IDD itself
The user space allow a user access by specifying data. These space can be accessed with the
logical data block addressing method described in Section 3.2. The internal test space is used
by Read/write test of self-diagnostics test, but user can’t use direct access. The system space is
accessed inside the IDD at power-on or during the execution of a specific command, but the
user cannot directly access the system space.
3.1.1 Cylinder configuration
The IDD allocates cylinders to the user space, Internal test space, and system space. Figure
3.1 is the cylinder configuration.
Spare areas (alternate areas) for defective sectors are provided in the user space. Several
sectors in the last track of one cylinder and several cylinders (alternate cylinders) in the user
space are allocated as alternate areas according to the user's assignment (MODE SELECT
command). See Subsection 3.1.2 for details.