Filter
Top Products
C141-E035-03EN 4 - 23
(2) SCSI connector and power supply connector
a. SCA type SCSI
The connector for the SCSI bus is an unshielded SCA-2 connector conforming to SCSI-3
type which has two 40-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.25 shows the
SCSI connector. See Section C.5 in Appendix C for signal assignments on the connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections
1.3 and 1.4 in SCSI Physical Interface Specifications.
Figure 4.25 SCA2 type SCSI connector
ESD contact