Fujitsu PG-FCS102 Network Card User Manual


 
101
E
Before Reading This Manual
Thank you for purchasing the PRIMERGY 1Gbit/s Ethernet I/O Module (hereinafter referred to as
this product or the card).
The card can be installed in the expansion card slot of the Fujitsu server blade to configure the Local
Area Network (LAN) system. This manual explains the 1Gbit/s Ethernet I/O Modules and the LAN
driver (for Windows). Read this manual carefully to handle the product correctly.
For details about the LAN driver, refer to manuals supplied with the server blade or the Fujitsu
PRIMERGY website:
(http://primergy.fujitsu.com)
May, 2007
For Your Safety
This manual contains important information, required to operate this product safely.
Thoroughly review the information in this manual before using this product. Especially note the points under "Safety",
and only operate this product with a complete understanding of the material provided.
This manual should be kept in an easy-to-access location for quick reference when using this product.
High Safety
The Products are designed, developed and manufactured as contemplated or general use, including without limitation,
general office use, personal use, household use, and ordinary industrial use, but are not designed, developed and
manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured,
could lead directly to death, personal injury, severe physical damage, or other loss (hereinafter "High Safety Required
Use"), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic control,
mass transport control, medical life support system, missile launch control in weapon system. You shall not use this
Product without securing the sufficient safety required for the High Safety Required Use. If you wish to use this Product
for High Safety Required Use, please consult with our sales representatives in charge before such use.