Filter
Top Products
170
5.4.5 Network Test
On the "Network Test" tab, you can verify IP network connectivity. This test verifies if the driver is
installed correctly and tests connectivity to a gateway or other specified IP address on the same
subnet. Network Test uses TCP/IP. The network test sends ICMP packets to remote systems and waits
for a response. If a gateway is configured, the test automatically sends packets to that system. If a
gateway is not configured or if the gateway is unreachable, the test prompts you for a destination IP
address.
5.4.6 Diagnostics
On the "Diagnostics" tab, you can perform diagnostic tests on the physical components of a network
adapter. The tests are continuously performed. The number of passes and fails in the "Pass/Fail"
column increments each time the tests are performed. For example, if a test is performed four times
and there are no fails, the value in the "Pass/Fail" column is 4/0. If there were 3 passes and 1 fail,
however, the value in the "Pass/Fail" column is 3/1.
` You must have Windows administrator privileges to perform diagnostics.
` The network connection is temporarily lost when these tests are running.