Filter
Top Products
118
3
Installing the LAN Driver
This chapter explains how to install the LAN driver.
3.1 Installing the Driver Software
` Get the LAN driver from the ServerStart CD-ROM included with the BX620 S4 server blade
and install.
If using a LAN driver, refer to the operation manual or help file included with the driver.
` Do not use LAN drivers downloaded from Broadcom's online service in the PRIMERGY
server.
` Before installing the driver software, verify that the Windows operating system has been
upgraded to the latest version with the latest service pack applied.
` To use TCP/IP Offload Engine (TOE), you must have Windows Server 2003 with Scalable
Networking Pack (SNP)
3.1.1 Installing the LAN Drivers
The installer will detect if SNP for Windows Server 2003 is installed on your machine. If it is, the
installer will install the NDIS 5.2 driver, which is necessary in order to use TOE. If SNP for Windows
Server 2003 is not installed on your machine, the installer will install the NDIS 5.1 driver and you
will not be able to use TOE.
1 Insert the ServerStart Disc1 CD-ROM.
2 Execute the following EXE file.
• For Windows Server 2003 x64
\DRIVERS\LAN\Broadcom\Ext\W2K3x64\DrvInst\setup.exe
• For Windows Server 2003
\DRIVERS\LAN\Broadcom\Ext\W2K3\DrvInst\setup.exe
• For Windows Server 2000
\DRIVERS\LAN\Broadcom\Ext\W2K\DrvInst\setup.exe
3 Click [Next].
The installation of the LAN driver is started.
4 Click [Finish].
5 Eject the CD-ROM, and restart the server blade.