Filter
Top Products
176 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
6. Tilt the paddle card away from the side of the chassis and lift the paddle card
up and out of the system.
7. Place the paddle card on an antistatic mat.
Related Information
■ “Install the Paddle Card” on page 176
▼ Install the Paddle Card
1. Lower the paddle card into the chassis.
FIGURE: Installing a Paddle Card (Illustrating Installation Into a SPARC Enterprise T5140
Server)
2. Slide the paddle card forward to plug it into the hard drive backplane.
3. Secure the paddle card with two No. 1 Phillips screws.
4. Install the fan power boards.
See “Install the Fan Power Board” on page 150.
5. Install the power distribution board.
See “Install the Power Supply Backplane” on page 173.
6. Install the motherboard assembly.
See “Install a Memory Mezzanine Assembly” on page 120.
Related Information
■ “Remove the Paddle Card” on page 175