Filter
Top Products
62 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
▼ Power Off the Server (Power Button - Graceful)
● Press and release the Power button.
If necessary, use a pen or pencil to press the Power button.
Related Information
■ “Power Off the Server (Service Processor Command)” on page 60
■ “Power Off the Server (Emergency Shutdown)” on page 62
▼ Power Off the Server (Emergency Shutdown)
Caution – All applications and files will be closed abruptly without saving changes.
File system corruption might occur.
● Press and hold the Power button for four seconds.
Related Information
■ “Power Off the Server (Service Processor Command)” on page 60
■ “Power Off the Server (Power Button - Graceful)” on page 62
▼ Disconnect Power Cords From the Server
● Unplug all power cords from the server.
Caution – Because 3.3v standby power is always present in the system, you must
unplug the power cords before accessing any cold-serviceable components.
Positioning the System for Servicing
These topics explain how to position the system so you can access the components
that need servicing.
■ “Extend the Server to the Maintenance Position” on page 63
■ “Remove the Server From the Rack” on page 64