Filter
Top Products
Servicing Motherboard Components 113
PCIe and XAUI Card Reference for SPARC
Enterprise T5240 Servers
The following table shows the physical PCIe/XAUI slot locations on the SPARC
Enterprise T5240 server, as viewed from the rear of the system.
PCIe or XAUI names in ILOM messages are displayed with the full FRU name, such
as /SYS/MB/RISER0/PCIE0.
Note – Fill the lower PCIe/XAUI slots (Slots 0 - 2) first.
Related Information
■ “Remove a PCIe or XAUI Card” on page 109
■ “Install a PCIe or XAUI Card” on page 109
■ “Remove a PCIe/XAUI Riser” on page 105
■ “Install a PCIe/XAUI Riser” on page 107
TABLE: FB-DIMM Configuration Installation Map (SPARC Enterprise T5240 Servers)
PCIe 3 PCIe 4 PCIe 5
PCIe 0/XAUI 0 PCIe 1/XAUI 1 PCIe 2
TABLE: PCIe and XAUI Support (SPARC Enterprise T5240 Servers)
Slot PCIe Controller Supported Device Types FRU Name
PCIe 0 or
XAUI 0
*
* Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.
1
‡
‡ PCIe controller 1 also supports the on-board Ethernet controller for the NET0, NET1, NET2, and NET3 ports.
x8 PCIe operating at x8
XAUI expansion card
/SYS/MB/RISER0/PCIE0
/SYS/MB/RISER0/XAUI0
PCIe 1 or
XAUI 1
†
† Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.
0
**
** PCIe controller 0 also supports the on-board storage controllers for the hard drives, DVD, and USB ports.
x8 PCIe operating at x8
XAUI expansion card
/SYS/MB/RISER1/PCIE1
/SYS/MB/RISER1/XAUI1
PCIe 2 0 x16 PCIe operating at x8 /SYS/MB/RISER2/PCIE2
PCIe 3 0 x8 PCIe operating at x8 /SYS/MB/RISER0/PCIE3
PCIe 4 1 x8 PCIe operating at x8 /SYS/MB/RISER1/PCIE4
PCIe 5 1 x8 PCIe operating at x8 /SYS/MB/RISER2/PCIE5