Filter
Top Products
Servicing Fan Modules 131
Fan Module Status LEDs
Each fan module contains a pair of LEDs, which are visible when you open the fan
compartment access door. The following table describes the status LEDs located on
the fan modules.
In addition, The front and rear panel Service Required LEDs are also lit if the system
detects a fan module fault.
If the fan fault causes an over temperature condition to occur, the system Overtemp
LED will turn on and an error message will be logged as well as displayed on the
system console.
Related Information
■ “Front Panel Controls and Indicators on SPARC Enterprise T5140 Servers” on
page 5
■ “Rear Panel Components and Indicators on SPARC Enterprise T5140 Servers” on
page 8
■ “Front Panel Controls and Indicators on SPARC Enterprise T5240 Servers” on
page 9
■ “Rear Panel Components and Indicators on SPARC Enterprise T5240 Servers” on
page 12
▼ Remove a Fan Module
1. Extend the server into the maintenance position.
See “Extend the Server to the Maintenance Position” on page 63.
TABLE: Fan Module Status LEDs
LED Color Notes
Power OK Green This LED is lit when the system is powered on
and the fan module is functioning correctly.
Service Required Amber This LED is lit when the fan module is faulty.
In addition, the system Fan Fault LED is lit.