Filter
Top Products
156 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
7. (SPARC Enterprise T5240 server) Install the fan modules.
See “Install a Fan Module” on page 133.
8. Install the top cover.
See “Install the Top Cover” on page 177.
9. (SPARC Enterprise T5140) Install the inner glides.
Slide each inner glide onto the mounting studs on the server until the glide snaps
into place.
10. (SPARC Enterprise T5140) Install the server into the rack.
See “Reinstall the Server in the Rack” on page 178.
11. Install the hard drives.
Note – Take care to be certain you are installing the hard drives in the correct drive
bays.
See “Install a Hard Drive” on page 73.
12. Install the DVD/USB module.
See “Install the DVD/USB Module” on page 147.
13. Connect the power cords.
Note – As soon as the power cords are connected, standby power is applied.
Depending on how the firmware is configured, the system might boot at this time.
14. Power on the system.
See “Power On the Server Using the poweron Command” on page 181.
Related Information
■ “Remove the Hard Drive Cage” on page 152
Servicing the Hard Drive Backplane
These topics explain how to remove and install hard drive backplanes.
■ “Hard Drive Backplane Overview” on page 157
■ “Remove the Hard Drive Backplane” on page 157