Filter
Top Products
Servicing Boards and Components 161
Front Control Panel Light Pipe Assemblies
Overview
The front control panel light pipe assemblies are mounted on each side of the hard
drive cage. You must remove the hard drive cage to access the screws that attach the
light pipe assemblies to the hard drive cage.
▼ Remove the Front Control Panel Light Pipe
Assemblies
1. Remove the hard drive cage.
See “Remove the Hard Drive Cage” on page 152.
2. Remove the No. 1 Phillips screws securing the front control panel light pipe
assembly to the hard drive cage.
■ Two screws secure the assembly to the hard drive cage in the SPARC Enterprise
T5140 server.
■ Three screws secure the assembly to the hard drive cage in the SPARC
Enterprise T5240 server.
FIGURE: Removing the Front Control Panel Light Pipe Assembly From a SPARC
Enterprise T5240 Server