Filter
Top Products
162 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
3. Slide the light pipe assembly out of the control panel.
Related Information
■ “Install the Front Control Panel Light Pipe Assemblies” on page 162
■ “Remove the Hard Drive Cage” on page 152
▼ Install the Front Control Panel Light Pipe
Assemblies
1. Insert the light pipe assembly into the control panel.
2. Align the control panel light pipe assembly with the mounting holes on the
hard drive cage.
■ Two screws secure the assembly to the hard drive cage in the SPARC Enterprise
T5140 server.
■ Three screws secure the assembly to the hard drive cage in the SPARC
Enterprise T5240 server.
The following figure illustrates installation of the front control panel light pipe on
a SPARC Enterprise T5240 server. Except for minor differences, such as the
number of screws, installation is the same for SPARC Enterprise T5140 servers.