Filter
Top Products
Servicing Boards and Components 153
9. (SPARC Enterprise T5240 server) Remove the fan modules and fan power
boards.
See “Remove the Fan Power Board” on page 149.
10. Remove the No. 2 Phillips screws securing the hard drive cage to the chassis.
Two screws secure the disk cage to each side of the chassis.
FIGURE: Removing a Hard Drive Cage (Illustrating Removal From a SPARC Enterprise
T5140 Server)
11. Slide the hard drive cage forward to disengage the backplane from the paddle
cards.
12. Disconnect the hard drive data cables.
a. Press the release button.
b. Remove the plug from the connector on the hard drive backplane.
Caution – The hard drive data cables are delicate. Ensure that they are safely out of
the way when servicing the motherboard.