150 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
FIGURE: Removing the Fan Power Board (Illustrates removal from a SPARC Enterprise
T5140 server)
8. Slide the fan power board to the left to disengage it from the paddle card.
9. Remove the fan power board from the system and place it on an antistatic mat.
Related Information
■ “Install the Fan Power Board” on page 150
▼ Install the Fan Power Board
1. Lower the board into its mushroom standoffs in the chassis floor and slide the
board to the right into the paddle card.
FIGURE: Installing a Fan Power Board (Illustrates installation in a SPARC Enterprise
T5140 server)
2. Secure the board to the chassis with a Phillips screw.