Filter
Top Products
172 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
FIGURE: Removing a Power Supply From a SPARC Enterprise T5240 Server
3. Remove the power distribution board.
See “Remove the Power Distribution Board” on page 164.
4. Remove the No. 2 Phillips screw securing the power supply backplane to the
power supply bay.
5. Lift the power supply backplane up and off its standoffs and out of the system.
FIGURE: Removing a Power Supply Backplane From a SPARC Enterprise T5240 Server
6. Place the power supply backplane on an antistatic mat.