Filter
Top Products
1. OPERATION
6
3. Press the 4 key to choose STR (Store).
4. Use the S or T key to choose timer program number and press the E key. For example,
choose “1” and the display then looks something like the one below.
5. Enter a channel number and press the E key.
6. Set the day of the week which to receive the program, using the
S or T key. Choose the
asterisk (*) to get a broadcast daily at the same time.
7. Press the E key.
8. Set start and stop times, in 24-hour notation, using the numeric keys. (When registering pro-
grams which follow one another consecutively, the time between programs should be set at
least one minute apart. For example, you have two programs to register, the first at 12:00-12:30
and the second at 12:30-13:00. In this case, set the time for the second program to 12:31-
13:00.)
9. Press the E key.
10.Press the C key.
1.8.2 Choosing timer programs for timer reception
Choose timer programs to use in timer reception as follows:
1. Press the PRG key and the 2 key to show the timer reception setting mode.
2. Press the 2 key to choose ON.
3. Use the S or T key to choose timer program number to activate, and press the X key.
4. Repeat step 3 as necessary to choose other programs.
5. After choosing all programs necessary, press the E key.
The start and stop times of the earliest program are displayed. The TIMER LED (orange) lights
when timer recording is enabled. Note that all keys except the PRG key are locked.
STORE TIMER REG
SET REG No. 0-F
R1 SET CHANNEL
No. in 3 FIGURES
R1 C000 SET DAY
of THE WEEK by ST
R1 C000 MON
SET START/STOP
TIMER RCV : 1-OFF
2-ON 3-RCL 4-STR
SET REG No. 0-F
PUSH S/T&X& E KEY
TIMER RCV No.: 4
4