Filter
Top Products
1. OPERATION
10
1.10 Sleep Timer
The sleep timer feature sleeps the set after reception has passed. Fax signal will not be received
when the sleep timer is active.
1.10.1 Activating the sleep timer
1. Press the PRG key.
2. Press the 3 key to show the sleep mode setting mode.
3. Press the 1 key to disable the sleep timer or the 2 key to enable it.
4. If the 1 key was pressed at step 3, press the E key to turn off the sleep mode. If the 2 key was
pressed, the display shown below appears. Go to step 5.
5. Using the numeric keys, set the amount of time (within 23h59m) to sleep the set. To sleep the
set 30 minutes later, for example, enter [0], [0], [3], [0].
6. Press the E key.
The TIMER LED (orange) lights. IN SLEEP!! is displayed when the sleep function becomes active.
1.10.2 Unlocking the keyboard
All keys except the PRG key are locked when the sleep timer function is in standby (before spec-
ified time passes). To unlock the keyboard in this case, do the following:
1. Press the PRG key to show the following menu.
2. Press the E key to unlock the keyboard and enable all operations.
1.10.3 Disabling the sleep timer
To disable the sleep timer, do the following:
1. Press the PRG key to show the following menu.
2. Press the E key.
SLEEP MODE : OFF
1-OFF 2-ON
SLEEP TIME:
SET SLEEP TIME
KEY LOCK : OFF?
PUSH E KEY
SLEEP MODE : OFF
PUSH E KEY