Filter
Top Products
1. OPERATION
12
4. Enter call sign (3 characters), using the arrow keys, and press the E key. (Use the W or X key
to choose location (with the cursor); use the S or T key to change character.) For example,
enter JMH, and the display should look something like the one below.
5. Enter frequency, using the numeric keys and the REV/
z
key (for decimal point), and press the
E key.
6. Press the 1, 2 or 3 key as appropriate to choose speed, and press the E key.
7. Press the 1 or 2 key as appropriate to choose IOC, and press the E key.
8. Press the 1 key to print facsimile in the format it is received, or the 2 key for format reversal.
9. Press the E key. The data for the channel is momentarily displayed and then the setting mode
display appears.
10.Press the C key to return to the standby display.
Existing channels may be edited similarly. Choose existing channel at step 2 and follow the
remaining steps.
C711 JMH 0.0
SET FREQUENCY
SET SPEED 120-60
1-120 2-90 3-60
SET IOC 576/288
1-576 2-288
SET REVERSE
1-OFF 2-ON