Filter
Top Products
4. NAVTEX OPERATION: NAVNET
4-6
4.4 Displaying Navtex Messages
4.4.1 Displaying navtex messages
1. At the standby display, press the NAVTEX soft key.
NAVTEX
SELECT
MSG
RCV
NAVTEX
RETURN
RX
SETUP
▲
1. IA55 JUN/06 03:57 518kHz SAR*
2. IA53 JUN/06 03:58 518kHz NEW#
3. IA52 JUN/06 03:59 518kHz NEW
4. IA48 JUN/06 04:01 518kHz NEW
Station ID, Category, No.
Date received
Time received
Frequency
* = "SAR" denotes SAR message.
# = NEW means unread message, and it disappears when
the power is turned off.
Navtex message selection screen
2. Rotate the [ENTER] knob to choose the message to display.
3. Press the SELECT MSG soft key or push the [ENTER] knob.
RETURN
1
A55 JUN/05 03:57 518kHz ERROR RATE=0.0%
ZCZC IA55
160520 UTC JUNE 05
JAPAN NAVTEX N.W. NR 0775/2002
ASHIKURI MISAKI, SOUTHWARD.
FLARE DROPPING. 150930Z TO 151100Z JUNE,
ALTERNATE 160930Z TO 161100Z JUNE.
WITHIN 10 MILES OF 31-00N 133-00E.
GEODETIC DATUM UNKNOWN.
NNNN
Station ID (I), Category (A), Message No. (55)
Date received
Time received
Frequency
Error Rate
Message
SELECT
MSG
Sample navtex message
4. Press the RETURN soft key several times to return to the standby display.