Filter
Top Products
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07)
45
www GarrettCom com
..
6KP4-RJ10MST,
4 Port@ 10Mb ST Fiber Port
2 6
T
LK
RX
ACT
F/H
TX RX
LK
ACT
F/H
TX RXLK
ACT
F/H
TX RXLK
ACT
F/H
1 5
3
2
1
FULL/HALF
1
ACTIVITY
LINK
2
3
6KP4-RJ10MST,
4 Port@ 10Mb ST Fiber Port
2 6
T
LK
RX
ACT
F/H
TX RX
LK
ACT
F/H
TX RXLK
ACT
F/H
TX RXLK
ACT
F/H
1 5
3
2
1
FULL/HALF
1
ACTIVITY
LINK
2
3
The Magnum 6KP4-F10ST
is a 10Mb multi-mode
fiber module with 4 ST-
Fiber ports. All four fiber
ports are ST connectors
and configured as 10Mb
Half-duplex by default.
The 10Mb ST-fiber ports
allow the user to connect
their legacy 10Mb network
to the Magnum 6K25e
switch. They also provide a convenient way for the half duplex
hub to connect to the switch through 10Mb fiber ports. It supports distances according to
the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km
distance may be available as a special order).
Each port has an Activity (ACT) LED indicating packets being
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.1c 6KP4-
FLSTFX,
2@10Mb &
2@100Mb
multi-mode
FX-ST “twist
lock” Module
The Magnum 6KP4-
FLSTFX is a combo fiber
module with two 10Mb +
two 100Mb multi-mode
fiber module and in
combine 4 ST-Fiber ports.
All four fiber ports are ST connectors and configured as 10Mb Half-duplex by default for
10Mb fiber and 100Mb Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow
the user to connect their legacy 10Mb network to the Magnum 6K25e switch. They also
provide a convenient way for the half duplex hub to connect to the switch through 10Mb