Filter
Top Products
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)
19
www GarrettCom com
..
Example 3.
In another application in an industrial environment, a 12 port Nebs
compliant, -24VDC managed switch is required to meet the fiber and copper connections
to cover the wider area of video CCTV. The switch must be SNMP enabled and managed
to easily monitor the whole setup.
The Magnum managed field switch easily qualifies for this requirement with the various
features and modularity it has. Loaded with MNS-6K management software, the field
switch provides a very effective and economical solution for the video -vignette
environment.
The security features (e.g. port-security, VLANs, SNMPv3, secure telnet, etc.) also boost
the Magnum managed switches to provide a very effective and reliable solution. The
modularity feature to support both copper and fiber at either 10/100/1000Mb speeds
easily meets the various speeds of legacy and future broadband requirements.
In a fast growing secure video environment, the 6KQ is a reliable and secure
solution. The modular design of the Magnum 6KQs, provide a wide range of copper/fiber
options to meet requirements. The Gigabit uplink for storage or broadband uplink allows
the telecom user a very effective solution to store their sensitive data securely.
Fig. 2.4c
: Magnum 6KQs deployed in a video security CCTV application for
monitoring and securing the premises
3.0 Installation
Before installing the equipment, it is necessary to take the
following precautions:
1.) If the equipment is mounted in an enclosed or multiple rack
assembly, the steady-state long-term environmental temperature
around the equipment must be less than or equal to 60
0
C.
2.) If the equipment is mounted in an enclosed or multiple rack
assembly, adequate airflow must be maintained for proper and
safe operation.
3.) If the equipment is mounted in an enclosed or multiple rack
system, placement of the equipment must not overload or load
unevenly the rack system.
4.) If the equipment is mounted in an enclosed or multiple rack
assembly, verify the equipment’s power requirements to prevent
overloading of the building/s electrical circuits.
5.) If the equipment is mounted in an enclosed or multiple rack
assembly verify that the equipment has a reliable and
uncompromised earthing path.
This section describes installation of the
Magnum 6KQ Switches, as well as connection of the
various Ethernet media types.
3.1 Locating Magnum 6KQ Switches
For vertical panel mounting and wall mounting, see
Section 3.3.1.
For vertical DIN-Rail mounting, see Section 3.3.