Filter
Top Products
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)
37
www GarrettCom com
..
the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full-duplex and half-
duplex.
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, and
an FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off).
5.2.2. 6KQF-2MSC, 2@100Mb multi-mode FX-SC “snap-in” Fiber
connector
The Magnum 6KQF-2MSC is two port module equipped with 2 multi-mode
100Mbps fiber optic transceivers. This is similar to the 6KQF-2MST. It has the same
LEDs indicating port activity (ACT), Link (LK), and FDX / HDX and 10/100 operation,
as well as the same face-plate lettering. The difference is that the 6KQF-2MSC is
equipped with SC-type "snap-in" fiber port connector instead of an ST-type.
5.2.3 6KQF-2SSCL, 2 Ports @100Mbps single-mode FX-SC-type, Sgl.M
The Magnum 6KQF-2SSCL is also a Fiber module equipped with 2 Single-mode (Long
Reach) SC-type connectors. It provides a long reach Fiber function in one module to the
6KQ Switches, supporting 100Mb single-mode (Long-Reach) fiber network segments.
The 6KQF-2SSCL, when installed in a Magnum 6KQ Switch, supports single-
mode fiber cable lengths of as much
as 40+ Km (see Power Budget,
Section 4.5). Each port has an
Activity (ACT) LED indicating
packets being received, a Link (LK)
LED indicating proper connectivity
with the remote device when lit, and
a FDX/HDX LED indicating full-
duplex mode when lit (or half-duplex when off).
TX RX
TX LK RX
LK
ACT
F/H
ACT
F/H
3
2
1
F/H
LINK
2
3
Activity
1
6KQF-2SSCL, 2 @100 Mb SSC Fiber Port
TX RX
TX LK RX
LK
ACT
F/H
ACT
F/H
TX RX
TX LK RX
LK
ACT
F/H
ACT
F/H
33
22
1
F/H
LINK
2
3
Activity
11
6KQF-2SSCL, 2 @100 Mb SSC Fiber Port