Filter
Top Products
6
Chapter 2: Quick Start
www.gateway.com
Warnings
Read all safety and operating instructions before you use the autoloader and
retain the instructions for future reference. This autoloader has been engineered
and manufactured to assure your personal safety. Incorrect use can result in
electrical shock or fire hazards. In order not to defeat the safeguards, observe
the following basic rules for installation, use, and servicing.
■ Heed all warnings on the autoloader and in the operating instructions.
■ Follow all operating instructions.
■ Place the autoloader on a firm, level surface free from vibration, and do
not place anything on top of the autoloader.
■ Make sure that the autoloader is positioned so it has correct ventilation.
■ Keep the autoloader away from heat sources such as radiators, heat
registers, furnaces, or other heat-producing appliances.
■ Use only the type of power source described in this guide or marked on
the autoloader.
■ Do not rest objects on the power cord and avoid placing the power cord
near high traffic areas. Hold the power cord by the plug when removing
it from an AC outlet. Pulling the cord can damage the internal wires.
■ To completely disconnect the power, remove the power cord and the SCSI
cable from their connections on the back of the autoloader.
■ Do not insert objects in the openings on the case.
■ Do not let liquid spill in or on the autoloader.
■ Do not attempt to service this autoloader except as directed in this guide.
All other servicing should be referred to qualified service personnel. For
information on servicing, contact Gateway Technical Support at
support.gateway.com
or at 877-485-1464.
■ Do not use oil, solvents, gasoline, paint thinners, or insecticides on the
autoloader.
■ Do not expose the autoloader to temperatures higher than 140°F (60°C)
or lower than -40°F (-40°C).
■ Keep the autoloader away from direct sunlight, strong magnetic fields,
excessive dust, humidity, and electronic or electrical equipment, which
generate electrical noise.