Filter
Top Products
42
Chapter 5: Troubleshooting and Diagnostics
www.gateway.com
Performing a system test
The System Test option cycles the autoloader through the process of loading,
calibrating, and unloading all cartridges in the carousel. Running a system test
verifies the basic operational soundness of the autoloader and tape drive. The
system test continues indefinitely until you press the C
ANCEL button. All regular
backup or restore operations are suspended while a system test is in progress.
To run a system test:
1 From the main menu, press the NEXT [+] or PREVIOUS [-] button until
Diagnostics appears on the top line of the LCD.
2 Press the ENTER button. System Test appears.
3 Press the Enter button to begin the test. The Test Count displays the number
of load-calibrate-unload cycles that have been completed during the test.
4 Press the CANCEL button to end the test.