Filter
Top Products
CHAPTER 4: Installing Components
36
4 Press down on the top of the expansion card latch (3) for the PCI expansion card you are
removing, then rotate the latch up (4) to release the card.
5 Gently remove the PCI card from the card slot, then lift the PCI card out of the chassis.
6 Position the new PCI expansion card over the PCI slot, then press the PCI expansion card
into the PCI slot.
7 From the back of the server, push the expansion card latch in to the locked position.
8 If you opened the card guide initially, rotate the card guide tab down to the locked position.
9 Follow the instructions in “Closing the server case” on page 26.
10 See the card’s documentation for software installation instructions.
Caution
Do not touch the contacts on the bottom part of the expansion card.
Touching the contacts can cause electrostatic damage to the card.
Caution
Make sure that you only plug a PCI-X expansion card into the PCI-X slot.
Plugging a PCI-X expansion card into a PCI slot may damage the PCI-X card.