Filter
Top Products
Configuring Your Gateway
Figure 17. Ether Switch Port Control Menu
The following procedure describes how to change the settings in the Ether Switch Port
Control menu.
1. To change a port from auto-negotiation to a fixed speed and duplex setting:
a. Uncheck the Auto check box for the port.
b. Click the radio that corresponds to the fixed speed you want to use for that port.
c. Under the Mode H/F column, leave the check mark for full-duplex mode or uncheck it
for half-duplex mode.
2. To disable a port, regardless of the auto-negotiation and duplex settings, uncheck Enable
for the port.
3. Click Apply.
34
SMCD3GN Wireless Cable Modem Gateway User Manual