Filter
Top Products
10
Note: If you accidentally remove or
drop the cover sheet during the
clamping station returning to the
nipping station, the control panel will
show “COVER?”. At this moment, you
have to place the cover on the nipping
station and press “START” button to
resume the process.
5. When the display indicates “PUSH
OPEN”, press the “OPEN” button to
open the clamps. Then, remove the
finished book from the right end of the
clamp station. Having completed one
bound book, the LED display of control
panel will count once for the total
binding amount as shown. Then the
control panel will display and flash
“LOAD BOOK” for binding next book.
6. Repeat step 1 to 5 for more books in
“MANUAL” operation.
MANUAL MODE (CONT.)
Figure 6
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
COVER ?
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
PUSH
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
OPEN
STAND BY
CLEAR
COUNTER
START
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
1
OPEN