Filter
Top Products
9
After the “STARTUP” procedures, the
PF-3200 will automatically set itself
MANUAL operation and flashing “LOAD
BOOK” display. Note that the “NOTCH”
LED is ON.
1. A. Press the “OPEN” button and place
the book block inside the clamps. Be
sure to follow the label instructions
on the clamp to load the book block
to the RIGHT of the red line, then
slide the book block to the far LEFT
of the clamps and you will see the
flashing “PUSH CLOSE” display.
B. Then press the “CLOSE” button to
clamp down the book block and you
will see the flashing “PUSH START”
display.
Note: In case you need to adjust the
book block after you have closed the
clamps, you can press the “OPEN”
button twice to release it. The LED
display will show “PUSH CLOSE”. After
you have adjusted the book block, you
have to press and hold the “CLOSE”
button until the clamps close. Then you
will see the flashing “PUSH START”
display again.
C. Press the “START” button. The
LED display of control panel will
show a “←” sign and the clamp
station will move over the notching
station for notching.
2. After the first notching process, the
clamp station will remain to the left side
of PF-3200 and the LED display of the
control panel will display and flash
“LOAD COVER”.
3. Center the cover sheet and adjust the
side guide: Measure the width of the
book plus half the thickness of the
spine. Then set side guide accordingly.
4. Place the cover on the nipping station,
the “START” LED will be lit and flashing
“PUSH START”. Then press the
“START” button to move the clamp
station over the nipping station starting
the binding process for the book block
and cover sheet.
MANUAL MODE
Figure 5
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
LOAD
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
BOOK
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
PUSH
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
CLOSE
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
PUSH
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
START
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
LOAD
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
COVER
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
‹––––––––––
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
BIND