2
• Do not attempt to service your PF-3200
yourself. Contact an authorized GBC
service representative for any required
repairs or major maintenance for your
PF-3200.
• There are NO user-serviceable parts
inside the machine. To avoid potential
personal injury and/or property or
machine damage, DO NOT
REMOVE THE MACHINE’S COVER.
• You may clean the exterior of the
PF-3200 using a soft, damp cloth. Do not
use detergents or solvents as damage to
the machine may occur.
SAFETY MESSAGES IMPORTANT SAFEGUARDS SERVICE
CLEANING
The safety of you and others is very
important to GBC. Important safety
messages and information are contained
within this manual as well as on the
machine itself. Please be certain to
carefully read and understand all of
these before operating the machine.
The safety alert symbol precedes
each safety message in this
Operator Manual. This symbol indicates a
potential personal safety hazard that could
hurt you or others, as well as cause
product or property damage.
The following pictorial is found on the
PF-3200:
This safety message means that you
could be seriously hurt or killed if you
open the product and expose yourself to
hazardous voltage. NEVER remove the
machine’s outer cover. ALWAYS refer
service requirements to qualified GBC
Personnel.
• Use the PF-3200 Binder only for its
intended purpose of binding paper and
covers according to the indicated
specifications.
• Before operating the machine, make
certain that the PF-3200 is placed on a
secure, stable work area. This will help
prevent the machine from falling and
possibly causing personal injury and
damage.
• Retain this Operating Instructions
manual for later use.
CAUTION: IN CASE OF
EMERGENCY, USE THE POWER
CORD AS A MAIN DISCONNECT.
• The PF-3200 must be connected to a
supply voltage corresponding to the
electrical rating of the machine operating
instructions (also listed on the serial
number label).
• The socket-outlet shall be located near
the equipment and shall be easily
accessible.
• The grounding plug is a safety feature
and will only fit into the proper grounding
type power outlet. If you are unable to
insert the plug into an outlet, contact a
qualified electrician to have a suitable
outlet installed. Do not alter the plug on
the end of the cordset (if provided) of the
PF-3200. It was provided for your safety.
• Unplug the PF-3200 before moving the
machine or whenever the machine is not
in use for an extended period of time.
• Do not operate the PF-3200 if the
machine has a damaged power supply
cord or plug. Do not operate the
machine after any malfunction, if liquid
has been spilled into the machine, or if
the machine has been damaged in
any way.
• Do not overload electrical outlets beyond
their capacity. To do so can result in fire
or electrical shock.