Filter
Top Products
14
STANDBY MODE
Press “STANDBY” button, the PF-3200 will
temporarily lower the temperature of glue
tank so it won’t burn the glue when the
machine is not operated. The LED displays
“STBY00” as shown below. Where “00” is
the timer display for the duration of the
standby period.
Press “STANDBY” button again when the
“STANDBY” LED is on, the PF-3200 will
reheat the glue tank to the working
temperature, then the “READY” LED will
be lit and waiting for your desired
operation.
Note that you have to wait a few minutes
when LED displays “WARM00” status. The
glue tank of PF-3200 will be reheated,
then the control panel will display and flash
“LOAD BOOK” after “HOT” status.
Figure 10
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
LOAD
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
BOOK
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
STBY 00