Filter
Top Products
6
INSTALLATION
Note: You must remove the three red
shipping brackets before installing
your PF-3200.
The procedures for installation:
Step 1:
Remove the red shipping bracket
located on the left side of the clamp
station as shown. Then reinstall the
screws in clamp station.
Step 2:
Remove two red shipping brackets that
are located around the nipping station
as shown.
Step 3:
Slide in the glue draining tray
underneath the glue tank as shown.
Step 4:
Place your PF-3200 on a safe, firm and
solid table. Then mount the cover-sheet
holder to the right side of the machine
as shown.
Step 1.
Step 2.
Step 3.
Step 4.
Figure 2