Filter
Top Products
SAFETY INSTRUCTIONS
CAUTION: PF-3200 has
implemented secondary
thermostat to prevent the glue
tank temperature from going over
392°F (200°C). When it occurs, the
power of PF-3200 will be automatically
turned off. You have to wait for the glue
tank to cool down before you can
restart the machine. If this problem
occurs again, call your authorized
dealer for service.
In case of EMERGENCY:
1. Press the “EMERGENCY” button when
you encounter a problem during
operation or bookbinding. This will shut
down all the actions of PF-3200, which
include the stations and motors.
Meanwhile, the LED DISPLAY of the
control panel will display and flash the
“STOP” symbol.
2. Correct the problem. Then turn the
“EMERGENCY” stop button to the right
in order to reset the machine. The
“START” LED will be lit.
Note: You can use “OPEN” and
“CLOSE” buttons to open or close the
clamp at this time.
3. This will clear the problem on your
PF-3200. Press the “START” button to
restart your PF-3200. The LED display
of the control panel will display and flash
“LOAD BOOK”.
Note: A. If you receive an error
(ERR=Lx), please refer to the
Appendix and follow the step
1 to 3 to reset your PF-3200.
B.Call for service if the error
message is still there.
4
4
2
3
6
1
5
Figure 1
EMERGENCY
EMERGENCY
RESET
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
STOP