Filter
Top Products
8
1. Turn ON the power switch of PF-3200
as shown. The heater of PF-3200 will
automatically heat the glue to the preset
working temperature and display the
status of the heating processes.
•The 4 leftmost spaces of LED: the
status of heating process (COLD,
WARM, or HOT).
•The 2 rightmost spaces of LED: the
elapsed time of heating.
2. Start of Glue Melting Process. The
status is COLD and the elapsed time is
one minute for this example as shown.
3. Melting glue is processing. The status
is WARM and the elapsed time is 10
minutes for this example as shown.
4. After heating for a while, the glue
temperature has reached HOT status.
The elapsed time is 20 minutes for this
example as shown.
5. When the glue temperature has
reached the working temperature,
PF-3200 performs the self-test and
stirs the melting glue.
6. PF-3200 is ready for bookbinding and
set to MANUAL mode for your desired
operation. At this moment, the control
panel will display and flash “LOAD
BOOK” for your attention. For binding
operations, please refer to the
MANUAL, AUTO and PAD operations.
STARTUP
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
COLD 01
2.
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
WARM 10
3.
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
HOT 20
4.
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
S-TEST
5.
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
LOAD
6.
STAND BY
CLEAR
COUNTER
START
OPEN
CLOSE
NOTCH
FUNCTION
READY
MANUAL
AUTO
PAD
BOOK
Figure 4
Figure 3