Filter
Top Products
17
To enter the timer setup menu, you will
need to press and hold down both the
“OPEN” and “CLOSE” buttons, then turn
the power on. You should see “SET TR” in
the LED DISPLAY. Press the
“FUNCTION” button to sequentially
display TR1, TR2, TR3, TR4, TR5, TR6,
“SAVE”, “CANCEL”, and “RESET”. Once
you have selected the setting to change,
you need to press the “OPEN” to increase
the time and the “CLOSE” to decrease the
time within their ranges. Press
“FUNCTION” button until you see “SAVE”
in the LED DISPLAY. Then press the
“START” button to change it. Or select
“CANCEL” and press “START” button to
exit. To return all settings to default,
please use “RESET” followed by “START”
button to recover the factory settings.
CAUTION: WE ONLY
RECOMMEND YOU TO
CHANGE TR1.
SETUP FOR TIMERS
Name Default Time Range Description
TR1 4 sec. 2.0 - 10 sec.
TR2 1 sec. 0.5 - 5 sec.
TR3 2 sec. 1.0 - 5 sec.
TR4 1 sec. 0.5 - 5 sec.
TR5 .5 sec. 0.5 - 5 sec.
TR6 5 sec. 3.0 - 10 sec.
DEFAULT TIMES FOR TRX
Nipping time.
Auto mode: After loading the cover, the
delay time before clamp station returns.
Auto mode: Clamp closing time
for the book.
Auto mode: Clamp opening time
for the book.
Auto mode: The clamp detecting
time right after closing.
Padding mode: The closing time of
clamp before opening it.
The fastest speed of settings that AUTO mode can perform is: TR1 = 2 sec.,
TR2 = 0.5 sec., TR3 = 1 sec., TR4 = 0.5 sec., TR5 = 0.5 sec.
Note that the book making speed depends on thickness of the book
and the loading technique for the paper and cover.