Filter
Top Products
2726
2726
4.5 IEEE 1394 Port
With built-in IEEE 1394 port, your notebook computer enables the
peripheral devices in transmitting digital video data or data backup.
The Windows system will automatically recognize it in installing a
suitable driver for it.
Moreover, you should install the driver of peripheral device to con-
nect with the IEEE 1394 port, for details please refer to the manual
that comes with your peripheral devices.
4.6 PC Card Slot
The PC card slot can be used as an interface between your com-
puter and a variety of communications devices, such as network
adapters, fax/modems or provide additional data storage capacity.
Your computer’s PC card slot supports PCMCIA Type II and 32-bit
CardBus.
►Installing a Card◄
1. The top side of a PC card is usually identified with a label. Insert
the card into the slot with the label side up and the edge with
pinhole contacts going in first.
2. Insert the card into the slot. You will feel some resistance as the
card slides into the back of the slot.
3. PC cards require drivers, or a program that allows the operating
system to use a specific device. Many drivers are included with
Windows, but if not, you will be prompted to install the driver in-
cluded with your card.
4. The computer will beep twice to indicate successful installation.
A single beep means that there was a problem recognizing the
card.
►Removing a Card◄
1. Press the eject button on the card slot to release the eject but-
ton. Press the eject button again to release the card.