Filter
Top Products
Programming the Scanner
3-2
While you are asking HHP SET to do the “Download,”
“Upload,” and “Diagnostic” with the scanner, HHP SET will
ask you to use the scanner to scan the Host Link Command
for initial handshaking with HHP SET and then perform your
desired action.
HHP SET Host Link
Software Installation
You may download HHP SET from the IT3220 or
VT3060B/3080B product pages from our web site at
www.hhp.com
On-screen Configuration
Compared with the traditional configurations done via bar code
menus, HHP SET provides a GUI interface that allows the user
to easily configure the scanner. The Save feature allows the
configuration to be saved as a file. The Convert feature
consolidates all programmable parameters for a certain
application and prints the configuration list.
Configuration Download and Upload
You can retrieve (Upload) the configurations from the scanner
or send (Download) new configurations to the scanner. Of
course, duplicating preset configurations is as easy as 1-2-3.
Program Field Upgrade
Internal program (firmware) change or modification is only
one step away via the Field Upgrade feature of the utility.
Check Software Revision
You can use the Check Revision feature to check the
software revision number, to verify if the communication
between your scanner and host system is good, and to check
the operation of the beeper and the indicator light.