Filter
Top Products
10 Hayes ADSL Ethernet User’s Guide
NOT the User ID and Password that you used to get into
the Basic Setup menu.) If you cannot remember or cannot
find your User ID and Password, call your service provider
and say that you have misplaced your user name and
password. Then enter them as well. This information is
required only with PPPoE and PPPoA protocols.
5
55
5
If you selected 1483 Bridged with Static IP or 1483 Routed
with Static IP as your Protocol, your provider should have
given you two series of numbers for the IP Address and
Gateway. Enter these numbers in the appropriate
boxes.
6
66
6
Leave the Virtual Circuit box at 0.
7
77
7
Click Update, then Save Configuration.
8
88
8
Go to your Web browser (i.e., Internet Explorer or Netscape
Navigator) and try to connect to a familiar Web address.
9
99
9
If you connect successfully, your installation is complete
and you’re ready to browse the web! If you do not
connect successfully, consult Appendix E, Troubleshooting.
If and when you want to use your modem for online gaming,
continue on page 16.
If You DO NOT Have Protocol, VPI, VCI, and
Encapsulation Settings from your Service Provider
If you do not have the settings from your service provider, you can
use the AutoConfiguration feature (instructions below). This
should work for most, but not all, users. If it doesn’t work for you,
we’ll tell you how to find and enter your settings manually.
Using AutoConfiguration
When you select the AutoPPP or AutoBridge option on the
Protocol list, the ADSL Ethernet searches its connection with the
DSL service provider to test the more popular Internet settings
(VPI, VCI, and Encapsulation).