Filter
Top Products
79
Appendix D
Macintosh and Linux Users:
Configuring TCP/IP Settings
If you are using a Macintosh computer or the Linux operating
system, you must ensure that your computer’s network, or
TCP/IP settings, are configured correctly. Otherwise, you will
not be able to connect to the Internet.
If you are a Windows user, you don’t have to perform this task
because Windows automatically configures your network
settings.
• Linux Users
Linux UsersLinux Users
Linux Users: Turn to page 80.
• Macintosh users:
Macintosh users: Macintosh users:
Macintosh users: Continue below.
Macintosh TCP/IP Settings
Depending on your Mac OS, the directions to configure your
Macintosh’s network settings will differ. For OS X, follow the
instructions below. Otherwise go to page 80.
For Mac OS X
1
11
1
From the Dock, choose System Preferences and then
Network to display the Network pane. (For OS X 3, you also
have to click the Configure button.)
2
22
2
From the Location: list box, make sure Automatic is selected.
3
33
3
Under the Show drop-down tab, choose Built-in Ethernet.
4
44
4
On the TCP/IP tab, make sure that Using DHCP is
highlighted in the Configure: list box. Do not enter anything
into the DHCP Client ID field.
5
55
5
Click Apply Now (or Save if prompted) and close the
Network pane.
6
66
6
For Mac OS X, you’re done with your network settings. Now
return to Establishing Communication on page 7.