Filter
Top Products
38 Hayes ADSL Ethernet User’s Guide
3.1.5 1483 Bridged (Pure Bridge
Mode)
Note: Setting up the modem in Pure Bridged Mode disables the
built-in NAT and SPI firewalls.
If you selected this mode on the Basic Setup page of your
Configuration Manager, the following fields appear:
Make these entries:
Enable Lets you enable or disable the connection.
VPI Supplied by your service provider.
VCI Supplied by your service provider.
Encapsulation LLC or VC. Supplied by your service
provider. See page 31.
Traffic Profile The index number 0-7 of a previously
configured profile defining the Quality of
Service. See page 54.
Virtual Circuit Accept the default, which is 0, or if you are
configuring an additional connection, select
another number. See page 33.