Filter
Top Products
35
Virtual Circuit Accept the default, which is 0, or if you are
configuring an additional connection, select
another number. See page 33.
When you finish, click Update, then Save Configuration.
3.1.3 1483 Bridged with Static IP
If you selected this protocol on the Basic Setup page of your
Configuration Manager, these fields appear:
Make the following entries:
Enable Lets you enable or disable the connection.
VPI Supplied by your service provider.
VCI Supplied by your service provider.
Encapsulation LLC or VC. Supplied by your service
provider. See page 31.
IP Address The modem’s static IP address specified by
your service provider.
Gateway The gateway’s WAN IP address specified by
your service provider.
MAC Address The modem’s MAC address (display only).