Filter
Top Products
80 Hayes ADSL Ethernet User’s Guide
For Mac OS 7.6.1 - 9.2.2
1
11
1
From the Apple menu, choose Control Panels and then
TCP/IP to display the TCP/IP dialog box.
2
22
2
Under Connect via:, select Ethernet built-in.
3
33
3
Under Configure:, select Using DHCP Server.
4
44
4
Do not enter anything in the DHCP Client ID field.
5
55
5
Close the TCP/IP dialog box. You will be asked if you want
to save the changes. Click Save.
Now return to Establishing Communication on page 7.
Linux Network Settings
The instructions for setting up boot-time DHCP vary dramatically
by distribution, so you may want to refer to your particular
version's documentation.
Note
:
If you have other network cards installed, you will need to pick
distinct Ethernet identifiers for each (eth0, eth1, eth2, etc.). If you
select an identifier other than eth0 for your ADSL Ethernet, use
that identifier throughout.
For RedHat
Edit or create /etc/sysconfig/network-scripts/ifcfg-eth0 so
that it contains the following three lines:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
For SuSE
Edit the file /etc/rc.config; search for the variables
NETCONFIG, NETDEV_0, and IFCONFIG_0.
Set them as follows (see the instructions in rc.config):
NETCONFIG="_0"