Filter
Top Products
36 Hayes ADSL Ethernet User’s Guide
Traffic Profile The index number 0-7 of a previously
configured profile defining the Quality of
Service. See page 54.
WAN IP Filter The index number 0-7 of a previously-
configured WAN IP Filter. See page 42.
Default Route Selected is the default for Virtual Circuit 0.
See page 33.
RIP Mode (Routing Information Protocol Mode). See
page 33.
Virtual Circuit Accept the default, which is 0, or if you are
configuring an additional connection, select
another number. See page 33.
3.1.4 1483 Routed with Static IP
Connection
If you selected 1483 Routed w/ Static IP in the Basic Setup
pages, the following fields appear:
Make these entries:
Enable Lets you enable or disable the connection.
VPI Supplied by your service provider.