Filter
Top Products
hp fax 1020 series
8
Setting the Answer Mode
You can send faxes in any answer mode. The answer mode setting
determines how the product answers the incoming call. Press the Answer
Mode button until the light shows under the desired option.
Setting the TAM/FAX Ring
If you have set the Answer Mode to TAM/FAX (“Setting the Answer Mode”
on page 8), you can use this function to select the number of times the
telephone will ring before the answering machine will answer.
See
“Answering Machine” on page 25 for complete information on using
the answering machine.
TAM/
FAX
Se
l
ect t
h
is setting to use t
h
e integrate
d
te
l
ep
h
one answering
machine. TAM/FAX allows you to receive both voice and fax calls
with voice calls going to the answering machine if you are unable
to take the call. See “Setting the TAM/FAX Ring” on page 8
to set
up the answering machine.
FAX
Se
l
ect t
h
is setting to
h
ave t
h
e pro
d
uct answer as a
f
ax mac
h
ine. You
can pick up voice calls if you answer the telephone before the fax
does.
See
“Setting the FAX Ring” on page 10 to finish setting up
your HP Fax.
Note:
The internal answering machine will not work in this mode.
TEL
Se
l
ect t
h
is setting to
h
ave t
h
e pro
d
uct a
l
ways answer as a
telephone. To receive faxes, press the Start/Copy button whenever
you hear fax tones.
Note:
You will be unable to receive faxes from extension
telephones. You must press the Start/Copy button to receive faxes.
Tip!
After 12 rings, the TAM will answer the call. This allows you to
use the remote access commands to operate your fax machine. See
“Listening to Messages Remotely” on page 30.