Filter
Top Products
Step 11: Connect the power cord
1. Connect the power cord to the power connector on the back of the all-in-one.
2. Connect the other end of the power cord to a grounded alternating current (AC) outlet.
NOTE Use only the power cord that came with the all-in-one.
Step 12: Connect a printer cable to the all-in-one
NOTE If you are using the all-in-one as a standalone fax machine, go to step 14. If you are
using it as a standalone copier, go to step 15.
Connect the USB cable (A/B) cable to the correct port.
CAUTION Do not connect the cable to a computer at this time.
10 Chapter 1 Setting up the all-in-one ENWW