Filter
Top Products
Step 17: Test the copier by using the automatic document
feeder (ADF)
1. Load the configuration report that you just printed print-side down into the ADF input tray.
2. Adjust the media guides to sit against the page.
3. Press Start Copy.
Hint If the copy job produces a blank page, make sure that the original is loaded print-side up
and that no jams exist in the ADF and paper path. For information about removing jams and other
troubleshooting tips, see the online User Guide.
Step 18: Complete the hardware setup
If you are using the all-in-one as a standalone copier, the setup is complete. If you are using the all-in-
one as a standalone fax, go to step 21 to complete the setup. To install the software, go to step 19 for
Windows or step 20 for Macintosh.
ENWW Step 17: Test the copier by using the automatic document feeder (ADF) 13