Filter
Top Products
Step 5: Install the control-panel overlay (if not already
installed)
1. Remove the adhesive backing from the overlay.
2. Align the bottom of the overlay with the bottom of the control panel, and make sure that the holes
in the overlay align with the keys on the all-in-one.
3. Press the overlay from the bottom up toward the top until it is completely attached to the all-in-one.
NOTE Make sure that the overlay is aligned correctly and is not pressing any buttons.
The control panel includes the following areas:
1
2
3
4
5
1 fax controls
2 alphanumeric buttons
3 display and menu controls
4 copy controls
5 scan controls
4 Chapter 1 Setting up the all-in-one ENWW