Filter
Top Products
Step 15: Set the control-panel display language and
location (if necessary)
If prompted by the control panel, select your language and location. Follow the instructions on the control
panel.
NOTE The all-in-one automatically restarts after you select the location.
Step 16: Test the hardware setup by printing a
configuration report
1. Press Menu.
2. Use the < or the > button to select Reports, and then press
.
3. Use the < or the > button to select Config report, and then press
.
Hint If the page that prints is totally blank, remove the print cartridge, make sure that the sealing
tape is removed (see step 10), reinstall the print cartridge, and then try printing the page again.
12 Chapter 1 Setting up the all-in-one ENWW