Filter
Top Products
Table of contents
1 Setting up the all-in-one
Step 1: Prepare the location...................................................................................................................1
Step 2: Regulate the environment..........................................................................................................1
Step 3: Verify the package contents.......................................................................................................2
Step 4: Locate the all-in-one parts.........................................................................................................3
Step 5: Install the control-panel overlay (if not already installed)...........................................................4
Step 6: Install the media tray..................................................................................................................5
Step 7: Install the output bin support......................................................................................................7
Step 8: Install the automatic document feeder (ADF) input tray.............................................................7
Step 9: Install the ADF output support...................................................................................................8
Step 10: Install the print cartridge...........................................................................................................8
Step 11: Connect the power cord.........................................................................................................10
Step 12: Connect a printer cable to the all-in-one................................................................................10
Step 13: Connect to a telephone line...................................................................................................11
Step 14: Turn on the all-in-one.............................................................................................................11
Step 15: Set the control-panel display language and location (if necessary).......................................12
Step 16: Test the hardware setup by printing a configuration report....................................................12
Step 17: Test the copier by using the automatic document feeder (ADF)............................................13
Step 18: Complete the hardware setup................................................................................................13
Step 19: Connect to a Windows computer (Windows only).................................................................14
Step 20: Connect to a Macintosh computer (Mac OS X V10.3 and 10.4 only)....................................15
Step 21: Fax setup...............................................................................................................................16
Step 22: Test the software installation.................................................................................................17
Step 23: Register the all-in-one............................................................................................................17
Step 24: Program the Scan To button (Windows only)........................................................................17
Step 25: Use the HP ToolboxFX software to set device settings (Windows only)...............................17
Step 26: Support information................................................................................................................18
Congratulations!...................................................................................................................................18
Tips for using the all-in-one..................................................................................................................18
Preventing streaks and spots on scans and copies.............................................................18
Clearing print jams...............................................................................................................19
ENWW v