Filter
Top Products
Step 13: Connect to a telephone line
NOTE If you are not using the fax functionality, go to step 15.
1. Connect the included fax cord to the port on the all-in-one that is marked with an "L".
2. Connect the cord to a telephone jack.
NOTE Use only the fax cord that came with the all-in-one. For more information about faxing,
see the online User Guide.
Step 14: Turn on the all-in-one
Press the power switch on the back of the all-in-one.
Hint If the all-in-one has no power and no lights are lit on the control panel, make sure that the
power cord is attached securely to both the all-in-one and a power outlet. Also, if the power cord
is connected to a power strip, make sure that the power strip is switched on, or connect the all-
in-one directly to a wall outlet to test the power strip.
ENWW Step 13: Connect to a telephone line 11